Illustra Pro PTZ 30x Configuration User Manual page 78

Table of Contents

Update the exacqVision Server

When a new version is released you can update your existing exacqVsion Server.

Procedure 6-3 Update an Application

Step Action

Select Setup, Applications then Upload Application. The Upload tab will display.

Select Browse. Navigate to where the new firmware files has been saved.

Select the new firmware file and select Start. The existing firmware will be replaced by the new firmware

version.

Uninstall the exacqVision Server

The exacqVision Server can be uninstalled if required.

Procedure 6-4 Uninstall the exacqVision Server

Step Action

Select Setup, Applications.

Select the eqacqVision Edge Version.

Select Remove.

You will be prompted to confirm the removal, select Yes. The exacqVision server will be removed and the

camera will reboot.

Note:

You must unmount or remove the SD card if the edge server files are on the SD card otherwise when the camera

reboots the edge sever files will be re-installed.

Formatting the SD Card

If the SD Card which has the files for the edge server is in use and requires formatting you must first Stop the

edge server and then format the card. When the camera reboots the edge server files will be installed and

operational.

Illustra Pro PTZ Configuration & User Guide

- End -

Table of Contents

Show Quick Links

Table of Contents