Illustra Pro PTZ 30x Configuration User Manual page 102

Dynamic DNS
Configure the Dynamic DNS settings for the camera.
Procedure 8-12 Configure Dynamic DNS
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Dynamic DNS from the Network menu.
The Dynamic DNS tab displays.
3 Select the Service Enable check box to enable Dynamic DNS.
Other text boxes on the tab become available for entry.
OR
Deselect Service Enable check box to disable Dynamic DNS.
The default setting is 'Disabled'.
4 If DNS has been enabled:
a Enter the Camera Alias in the text box.
b Select a Service Provider from the drop-down list:
• dyndns.org
• easydns.com
• no-ip.com
• zerigo.com
• dynsip.org
• tzo.com
c Enter a Username in the text box.
d Enter a Password in the text box.
e Enter Service Data in the text box.
5 Select Apply to save the settings.
Illustra Pro PTZ Configuration & User Guide
- End -
102