Illustra Pro PTZ 30x Configuration User Manual page 34

Date/Time/OSD
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Picture Settings from the Video menu.
3 Select the Picture Additional tab.
4 Select the Enable EIS check box to enable Electronic Image Stabilization.
OR
Deselect the Enable EIS check box to disable auto focus.
The default setting is 'Off'.
Frame Noise Reduction.
The brightness of the object (AGC) in auto mode changes the level of Frame Noise Reduction.
Procedure 3-14 Enable/Disable Frame Noise Reduction
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Picture Settings from the Video menu.
3 Select the Picture Additional tab.
4 Select the Enable Frame Noise Reduction check box to enable Frame Noise Reduction.
OR
Deselect the Enable Frame Noise Reduction check box to disable Frame Noise Reduction.
The default setting is 'On'.
Date/Time/OSD
Change the camera name and date and time and enable OSD.
Camera Name
The camera name will be displayed on the GUI banner and the on-screen display for the camera. This name will
also be displayed when using Illustra Connect or ONVIF.
Procedure 3-15 Change the Camera Name
Step Action
1 Select Setup on the GUI banner.
2 Select Date/Time/OSD from the Video menu.
The Date/Time/OSD tab displays.
34
- End -
- End -