Illustra Pro PTZ 30x Configuration User Manual page 106

Backup/Restore
1 Select Setup on the GUI banner to display the setup menus.
2 Select Maintenance from the System menu.
3 Select the Maintenance tab.
4 Select Browse next to the Select firmware image file text box.
The Choose file to Upload dialog will be displayed.
5 Navigate to the location where the firmware file has been saved.
6 Select the firmware file and then select the Open button.
7 Select Upload.
The file transfer will begin.
Do not disconnect power to the camera during the upgrade process. The camera restarts automatically
after the upgrade has been completed, which can take from 1 to 10 minutes.
The Log in page will be displayed.
Backup/Restore
Back up the camera data and restore from a previously saved data file. The configuration settings of the camera
can be saved to a data file in a specified location and then used to restore the camera configuration.
Note:
A saved backup data file created on a camera is camera specific and cannot be used to restore the settings on a
different camera.
Procedure 9-4 Back up Camera Data
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Maintenance from the System menu.
3 Select the Backup/Restore tab.
4 Select Backup.
You will be prompted to save the backup file.
5 Select the location to save the backup file.
6 Select Save.
Procedure 9-5 Restore Camera from Backup
Step Action
106
- End -
- End -