Table of Contents
Advertisement
Firewall
1
Select Setup on the GUI banner to display the setup menus.
2
Select IEEE 802.1x from the Security menu.
The EAP Settings tab is displayed.
3
Select the Enable IEEE802.1x check box to enable IEEE802.1x security .
OR
4
De-select the Enable IEEE802.1x check box to disable IEEE802.1x security.
The default is 'enabled'.
5
Select the EAPOL Version from the drop-down menu.
6
Select the EAP Method using the radio buttons.
7
Enter the EAP identity name in the EAP Identify textbox.
8
Select Upload to navigate to the CA Certificate location.
The Choose file dialog will be displayed.
9
Navigate to the location where the certificate has been saved.
Select the file and select Open.
10
Select Upload.
The upload process will start.
(Select View to review the certificate or Delete to remove it.)
11
If PEAP is selected:
• Enter the required PEAP Password.
OR
• If TLS is selected -
a
Select Upload to navigate to the Client Certificate location.
The Choose file dialog will be displayed.
b
Navigate to the location where the certificate has been saved.
c
Select the file and select Open.
d
Select Upload.
The upload process will start.
(Select View to review the certificate or Delete to remove it.)
e
Enter the required Private Key Password.
Firewall
Configure the Basic Filtering and Address Filtering for the firewall.
Basic Filtering
Enable or disable basic filtering for the camera including:
• ICMP (Internet Control Message Protocol) Blocking
Illustra Pro PTZ Configuration & User Guide
- End -
87
Hide quick links:
Advertisement
Table of Contents
