Table of Contents
Advertisement
Firewall
• RP (Reverse Path) Filtering
• SYN Cookie Verification.
Procedure 7-14 Enable/Disable Basic Filtering
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select Firewall from the Security menu.
Select the Basic Filtering tab.
3
Select the ICMP Blocking check box to enable ICMP blocking.
OR
Deselect the ICMP Blocking check box to disable ICMP blocking.
The default setting is 'Disabled'.
4
Select the RP Filtering check box to enable the RP filtering.
OR
Deselect the RP Filtering check box to disable.
The default setting is 'Disabled'.
5
Select SYN Cookie Certification check box to enable SYN cookie certification.
OR
Deselect the SYN Cookie Certification check box to disable.
The default setting is 'Disabled'.
Address Filtering
Configure the IP or MAC addresses that are denied access to the camera.
Procedure 7-15 Enable/Disable and Configure Address Filtering
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select Firewall from the Security menu.
3
Select the Address Filtering tab.
4
Select Off to disable address filtering completely.
OR
Select Allow to allow address filtering for specified addresses
OR
Select Deny to deny address filtering for specific addresses.
The default setting is 'Off'.
88
- End -
Hide quick links:
Advertisement
Table of Contents
