Page 1
Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras Quick Start Guide...
Page 2
Notice Please read this manual thoroughly and save it for future use before attempting to connect or operate this unit. The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice. Copyright Under copyright laws, the contents of this manual may not be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form, in whole or in part, without...
Table of Contents Illustra Flex Series 3MP and 8MP Outdoor Bullet Cameras Product features Product overview Installation System requirements Network Connection Default IP Address DHCP Managing cameras with the Illustra Connect tool Network Topology Appendix A: Technical Specifications Appendix B: Stream Resolutions...
Page 4
Warning • This unit operates at AC 24V/ PoE. • Installation and service should be performed only by qualified and experienced technicians and comply with all local codes and rules to maintain your warranty. • To reduce the risk of fire or electric shock, do not expose the product to rain or moisture. •...
Downloads and search for Bubble Handling and Cleaning Procedure. Product overview This chapter explains the features and installation of the Illustra Flex Bullet cameras. Product code and description of the camera is provided in the table below. Table 1 Product code and description of the Illustra Flex Bullet cameras...
Page 6
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Figure 3 on page 2 and Figure 4 on page 3 illustrates dimensions and physical properties of the units as well as a pictorial index of the camera connectors. Descriptions of these connectors are available in Table 5 on Page 3.
Page 7
Connection for the RJ-45 cable for network Ethernet (PoE) connection as well as PoE. The input and output cables of the Illustra Flex Bullet cameras are labeled with icons that designate their usage. Input/Output connector descriptions on page 4 illustrates and describes these icons. 8200-1456-03 G0...
Page 8
Ground You can find the interior buttons and ports on the base of the Illustra Flex Bullet camera. Remove the two screws to open the cover for access to these pins. Refer to Figure 7 on page 4 and Table 8 on Page 5 for descriptions of these buttons and ports.
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Table 8 Descriptions of the interior buttons and ports of the Illustra Flex Bullet camera Index number Name Micro SD card slot Serial port Default: returns to factory default by pressing the button for five seconds...
Page 10
Figure 9 Mounting the Illustra Flex 3MP (IFS03B1BNWIT) Bullet camera to a ceiling Figure 10 Mounting the Illustra Flex 3MP (IFS03B1ONWIT) and 8MP Bullet cameras to a ceiling Mount the unit onto the ceiling and fasten it securely as seen in Figure 9 on page 6 and Figure 10 on page 6 or if mounting onto a wall refer to Figure 11 on page 7 and Figure 12 on page 7.
Page 11
Figure 11 Mounting the Illustra Flex 3MP (IFS03B1BNWIT) Bullet camera to a wall Figure 12 Mounting the Illustra Flex 3MP (IFS03B1ONWIT) and 8MP Bullet cameras to a wall Depending on the material of mounting surface, different screws and anchors than those supplied with the product may be required.
Page 12
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Procedure 2 Connecting the wires Step Action Attach the camera to the fixed surface. Pass all the signal cables through the mounting bracket. Connect the power cable to the power plugs with one of the following options: AC 24V: Connect 24V (~) cables to terminals ~AC 24V.
Page 13
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Figure 14 Adjusting the 3MP (IFS03B1ONWIT) and 8MP camera position - End - Procedure 4 Adjusting the sun shield hood Step Action Move the sun shield hood forward and backward to adjust the position of sunshade.
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide System requirements The table below lists the minimum requirement to implement and operate an Illustra Flex Bullet camera. Table 15 System Requirements System hardware Intel Pentium 2 2.4GHz or equivalent...
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Network Connection Default IP Address Since this is a network-based unit, an IP address must be assigned at the very first bootup. The default IP address of the unit is 192.168.1.168 and sub mask is 255.255.255.0.
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Procedure 5 Connecting from a computer Step Action Ensure the camera and your computer are in the same subnet. Check whether if the network is available between the unit and the computer by pinging the default IP address.
In addition to using the IE browser to access your camera, you can alternatively use the provided tool, Illustra Connect. Illustra Connect is a management tool designed to manage your network cameras on the LAN. It can: • help you find multiple network cameras •...
Page 18
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Procedure 9 Connecting to the camera using the static IP address Step Action The camera attempts to obtain an IP Address from the DHCP Server. When no DHCP Server is available the camera is assigned a Static IP address of 192.168.1.168.
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Network Topology The Illustra Flex cameras deliver video images and audio in real-time using the Internet and Intranet. It is equipped with an Ethernet RJ-45 network interface. The following images illustrate the network topology of the cameras.
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Appendix A: Technical Specifications The table below lists technical specifications of the Illustra Flex Outdoor Bullet cameras. General Features Model Type Illustra Flex Outdoor Bullet Camera IFS03B1BNWIT / IFS08B2ONWIT / Model No.
Page 21
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide 3MP (IK7 & IK10) = 2.8-12 mm Focal Length Range 8MP (IK9 & IK10) = 3.4-9 mm Focal Means Motorized Focal Type Varifocal Focus Type Motorized Auto Focus One-Touch IR Correction...
Page 22
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide 8MP does not include TWDR3x Noise Reduction 2D and 3D NR Audio Sampling Bits 16-BIT Input Type SE/Line/MIC Input Impedance 20K/Attenuation = 0 dB Maximum Input Level 2Vp-p Input connector...
Page 23
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Base Protocol TCP/IP - RFC4614 IPv4 - RFC791 Internet Layer Addressing IPv6 - RFC2460 TCP - RFC973 Transport Layer UDP - RFC768 HTTP/HTTPS - RFC2616 Data Transmission FTP - RFC959...
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Appendix B: Stream Resolutions Flex Gen 2 3MP and Flex 8MP Streaming Combinations Table 19 on page 20 and Table 20 on page 21 provide information for the stream resolutions and supported FPS of the Flex Gen 2 3MP cameras herein.
Page 25
Illustra Flex 3MP and 8MP Outdoor Bullet Quick Start Guide Table 20 Stream Set B (all resolution, codes and frame rate combinations of Stream 1, 2 and 3 are valid) Frame Frame Stream Frame Stream Stream TWDR Codecs Rates Codecs...