Illustra Pro PTZ 30x Configuration User Manual page 100

SMTP
h Select Apply.
SNMP Heartbeat
Enable or disable the SNMP Heartbeat.
Procedure 8-9 Configure SNMP Heartbeat
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select SNMP from the Network menu.
3 Select the Heartbeat tab.
4 Select the Enable Heartbeat check box to enable Heartbeat.
OR
Deselect the Enable Heartbeat check box to disable Heartbeat.
5 Drag the Heartbeat Interval (secs) slider to set the heartbeat interval.
CIFS
Configure the CIFS settings to allow files generated from the camera to be directed to network attached file
storage via the Common Internet File System (CIFS) protocol. This supplements existing distribution methods
such as FTP, SMTP, and email.
Note:
CIFS settings can also be configured via the Events and Actions menu. Refer to
Procedure 8-10 Configure CIFS Settings
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select the CIFS tab.
4 Select the Enable CIFS check box to enable CIFS.
Text boxes on the tab become available for entry.
OR
Deselect the Enable check box to disable CIFS.
The default setting is 'Enabled'.
Illustra Pro PTZ Configuration & User Guide
- End -
- End -
CIFS on Page 62
100