Illustra Pro PTZ 30x Configuration User Manual page 89

Firewall
5 If address filtering has been set to Allow or Deny:
a Enter an IP or MAC Address to allow/deny in the IP or MAC Address text box in the following
format xxx.xxx.xxx.xxx.
Note:
CIDR (Classless Inter-Domain Routing) is supported when using address filtering. If using a CIDR
address use the following format xxx.xxx.xxx.xxx/xx.
b Select Add.
6 Select Apply to save the settings.
Editing an Address Filter
Edit an existing address filter.
Procedure 7-16 Edit an Address Filter
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Firewall from the Security menu.
3 Select the Address Filtering tab.
4 Edit the IP or MAC Address in the IP or MAC Address text box.
5 Select Add to save the IP or MAC Address in the table.
6 Select Apply to turn address filtering on.
Deleting an Address Filter
Delete an existing address filter.
Procedure 7-17 Delete an Address Filter
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Firewall from the Security menu.
3 Select the Address Filtering tab.
4 Select
Illustra Pro PTZ Configuration & User Guide
to delete the corresponding address filter.
- End -
- End -
- End -
89