Illustra Pro PTZ 30x Configuration User Manual page 124

Technical Specifications
Electrical
For Illustra Pro PTZ indoor models, power can be provided by PoE Plus or by a 24 VAC power line. Local
powering is possible for indoor models, with the capability to have both sources connected at any time. The local
powering option will always be available, whatever the POE status. If both power sources are connected, the first
power source connected will provide all power until power goes away. The power source connected second will
serve as backup power and power the dome if the first source fails
The Illustra Pro PTZ outdoor models use 24V AC power.
PoE+
Ethernet Plus and be compliant to POE IEEE 802.3atTM
Class 4
Up to 100m (300 feet)
Compliance verification
24 VAC
Input Voltage
Line Frequency
Max Current Indoor
Max Current Outdoor
Power on in rush current
Illustra Pro PTZ Configuration & User Guide
Specification
Discovery
Streaming
External Interface Protocol
Specification
WS-Security
Multi-level password protection
User access log
WS-discovery - ws-discovery.pdf
RTP - RFC3550
RTSP - RFC2326
Unicast Streaming
Multicast Streaming - RFC1112 level 1
Illustra API 3.0
B0 SOAP - SOAP 1.2
WS-Addressing
WS-Eventing
Details
22 to 30 VAC, Class 2 LPS
50/60 Hz
1.4 amps RMS
2.8 amps RMS
18 Amps for 5 ms
Details
ONVIF
124