Illustra Pro PTZ 30x Configuration User Manual page 24

Configuring the Video Stream
Alarm Video
It is possible to use either Stream 1 or Stream 2 for the on-board recording of alarm video.
Integration with American Dynamics Network Video Recorders
Stream 1 and Stream 2 can be configured via the Web GUI, as detailed here or via the Network Video Recorder
interface. Changes made to the streams via either method will be applied and the video will be displayed
according to the configuration
Opening the Web GUI live view while the Network Video Recorder is recording video will allow the stream to be
shared and will minimize the impact on camera resources.
Integration with other Illustra API Clients
Stream 1 and Stream 2 can be configured via the Web GUI, as detailed here, or via the Illustra API interface.
Changes made to the streams via either method will be applied and the video will be displayed according to the
configuration.
Opening the Web GUI live video will allow the stream to be shared with the Illustra API and will minimize the
impact on camera resources.
Configuring the Video Stream
Adjust the settings for each video stream.
Procedure 3-1 Configure the Video Stream settings
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Streams from the Video menu.
The Video Stream Settings tab displays.
3 Select either Stream1 or 2 from the Stream Number drop-down menu .
4 Select the required Codec by selecting the radio buttons:
• H264
• MJPEG
The default setting is 'H264'.
5 Select the required Resolution from the drop-down menu.
The resolutions available will depend on the Image Source selected:
24
Stream 1
1920x1080
1600x900
1280x720
Stream 2
1920x1080
1600x900
1280x720