Illustra Pro PTZ 30x Configuration User Manual page 90

Remote Access
Remote Access
SSH Enable
Enables Secure Shell access into the camera if remote access is permitted by the camera network. This will also
enable American Dynamics Level 3 Technical Support to diagnose any problems on the camera.
Note:
It is recommended to keep SSH Enable disabled. This function should only be enabled when it is requested by
American Dynamics Level 3 Technical Support.
Procedure 7-18 Configure SSH
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Remote Access from the Security menu.
The Remote Access tab displays.
3 Select the SSH Enable check box to enable SSH.
OR
Deselect SSH Enable check box to disable SSH.
The default setting is 'Disabled'.
ONVIF
The Web GUI allows ONVIF functionality to be managed at a high level. ONVIF Discovery Mode and User
Authentication can be enabled or disabled.
• ONVIF Discovery Mode allows enabling or disabling discovery of the camera via ONVIF.
• ONVIF User Authentication allows the camera to accept ONVIF commands from all users or only
authenticated users. Enabling User Authentication ensures the camera will only execute commands
from authenticated users.
The separation of Discovery Mode and User Authentication allows the camera to be set up in a configuration that
suits requirements for the network and users. The preferred discovery method for the camera is Illustra Connect,
and this utilizes ONVIF discovery. It is therefore recommended that ONVIF Discovery Mode always be enabled.
ONVIF Discovery Mode
Enable or disable ONVIF discovery on the camera.
Procedure 7-19 Enable/Disable ONVIF Discovery Mode
Step Action
90
- End -