Table of Contents
Advertisement
FTP
FTP
Configure the FTP settings for the FTP server. This is required to send video files from triggered analytic alerts.
FTP must be configured to enable FTP video alerts when using alarms and analytic alerts.
Note:
FTP settings can also be configured via the Events and Actions menu. Refer to
Procedure 8-3 Configure FTP Server Settings
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select FTP from the Network menu.
The FTP tab displays.
3
Select the Enable check box to enable FTP.
Text boxes on the tab become available for entry.
OR
Deselect the Enable check box to disable FTP.
The default setting is 'Disabled'.
Note:
When in Enhanced Security mode, enabling FTP will require the admin account password.
4
Enter the IP address of the FTP Server in the FTP Server text box.
5
Enter the FTP port in the FTP Port text box.
The default setting is 21.
6
Enter the FTP username in the Username text box.
7
Enter the FTP password in the Password text box.
8
Enter the FTP upload path in the Upload Path text box.
Note:
When entering the upload path the following format should be used '//<name of ftp directory>/<folder>'
Note:
Refer to
Illustra Pro PTZ Configuration & User Guide
Test FTP Settings
on
Page 97
to confirm that the FTP settings are working as expected.
- End -
FTP
on
Page
60.
96
Hide quick links:
Advertisement
Table of Contents
