Illustra Pro PTZ 30x Configuration User Manual page 69

Event Logs
• Component - internal software component that raised the fault for a motion detection alert. This will be
listed as ANALYTICS.
• Severity - indicates how serious the fault is. Motion detection alerts are listed as 'Warning'.
• Detail - extra information that supplements the motion detection alert.
• Delete - remove the motion detection alert notification from the fault table.
Procedure 5-15 Display Event Log
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Event Logs from the Events and Actions menu.
The Event Log tab displays.
Triggered motion detection alerts will be displayed.
Procedure 5-16 Delete Current Events
1 Select Setup on the GUI banner to display the setup menus.
2 Select Event Logs from the Event and Actions menu.
3 Select the Event Log tab.
4 Select the corresponding Delete check box to mark the motion detection alert for deletion.
OR
Deselect the corresponding Delete check box to keep the motion detection alert.
Note:
You can select the Select All check box to mark all motion detection alerts displayed in the list for
deletion.
5 Select Delete to delete the selected motion detection alerts.
You will be prompted to confirm the deletion.
6 Select OK to confirm the deletion.
OR
Select Cancel.
Fault Log
Any system or environmental faults experienced by the camera are displayed in the Fault Log with the following
information:
• # - details the fault index.
• Fault - a description of the fault.
69
- End -
- End -