Illustra Pro PTZ 30x Configuration User Manual page 37

Privacy Zones
Procedure 3-18 Define a Privacy Zone
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Privacy Zones from the Video menu.
The Privacy Zones tab displays.
3 Select
The video pane will display the current camera view.
4 Select
Enter the privacy zone name in the privacy zones Name text box.
5 Use the cursor to locate the start point for the privacy zone and then click and drag on the still image to
define the privacy zone area. As the cursor is moved, a red shape will appear on the image which
highlights the privacy zone.
6 Release the mouse button.
The selected privacy area will turn yellow.
7 Select Add to save the current privacy zone.
8 To re-select an alternative area for the privacy zone, select Cancel and repeat from step 4.
Note:
When a new privacy zone is created, it is automatically enabled, refer to
on Page 37
Enabling or Disabling a Privacy Zone
Select a privacy zone to hide or display on the camera.
Procedure 3-19 Enable/Disable a Privacy Zone
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select Privacy Zones from the Video menu.
The Privacy Zones tab displays.
3 Select
4 The video pane will display the current camera view.
5 Select the corresponding Enabled check box to enable the privacy zone.
OR
6 Deselect the corresponding Enabled check box to disable the privacy zone.
Illustra Pro PTZ Configuration & User Guide
to start the video stream if it is not already active.
. The page updates to display an Add and Cancel button.
to modify this setting.
to start the video stream if it is not already active.
- End -
- End -
Enable/Disable a Privacy Zone
37