Table of Contents
Advertisement
SMTP
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select SMTP from the Network menu.
The SMTP tab displays.
3
Select the Enable SMTP check box to enable SMTP.
Text boxes on the tab become available for entry.
OR
Deselect the Enable check box to disable SMTP.
The default setting is 'Disabled'.
Note:
When in Enhanced Security mode, enabling SMTP will require the admin account password.
4
Enter the IP Address of the mail server in the Mail Server text box.
5
Enter the server port in the Server Port text box.
The default setting is '25'.
6
Enter the from email address in the From Address text box.
7
Enter the email address to send email alerts to in the Send Email to text box.
8
Select the Use authentication to log on to server check box to allow authentication details to be
entered.
OR
Deselect the Use authentication to log on to server to disable authentication.
The default setting is 'Disabled'.
9
If 'Use authentication to log on to server' check box has been selected:
a
Enter the username for the SMTP account in the Username text box.
b
Enter the password for the SMTP account in the Password text box.
10
Select Apply to save the settings.
Note:
Refer to
Test SMTP Settings
Test that the settings set in
Procedure 8-7 Test the SMTP Settings
Step Action
Illustra Pro PTZ Configuration & User Guide
Test SMTP Settings
on
Page 98
Configure SMTP Settings
to confirm that the SMTP settings are working as expected.
- End -
on
Page 97
have been configured correctly.
98
Hide quick links:
Advertisement
Table of Contents
