Table of Contents
Advertisement
Date/Time
1
Select Setup on the GUI banner to display the setup menus.
2
Select Maintenance from the System menu.
3
Select the Backup/Restore tab.
4
Select the Browse button next to the Select saved data file text box.
The Choose file to Upload dialog will be displayed.
5
Navigate to the location where the backup file has been saved.
6
Select the backup file and then select the Open button.
7
Select Upload.
You will be prompted to confirm that you would like to upload the backup file.
8
Select OK to confirm the backup .
Or
Select Cancel.
Do not disconnect power to the camera during the restore process. The camera restarts automatically
after the restore has been completed, which can take from 1 to 10 minutes.
The Log in page will be displayed.
Date/Time
Set the date and time on the camera.
Note:
Date and Time can also be configured in the Quick Start menu. Refer to
Procedure 9-6 Configuring the Date and Time
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select Date Time from the System menu.
3
Select the Time 24-hour check box to enable the 24-hour clock.
Or
Deselect the Time 24-hour check box to enable the 12-hour clock.
The default setting is '24-hour'.
4
Select the Date Display Format from the drop-down menu:
• DD/MM/YYYY
• MM/DD/YYYY
• YYYY/MM/DD
The default setting is 'YYYY/MM/DD'.
Illustra Pro PTZ Configuration & User Guide
- End -
Date Time
on
Page
21.
107
Hide quick links:
Advertisement
Table of Contents
