Illustra Pro PTZ 30x Configuration User Manual page 40

PTZ Parameters
Automatic Flip
Use the automatic (proportional) "flip" feature when you need to track someone who walks directly under the
camera and continues on the other side. You start the flip by moving the tilt control to its lower limit and holding for
a brief period. When the flip engages, the camera automatically rotates 180°. You may then continue to track the
person as long as the tilt control stays in its lower limit. Once the tilt control is released, the camera resumes
normal operation.
Procedure 4-1 Enable/Disable Automatic Flip
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select PTZ Parameters from the PTZ Settings menu.
Select the PTZ Parameters tab.
3 Select the Automatic Flip check box to enable automatic flip.
OR
Deselect the Automatic Flip check box to disable automatic flip.
The default setting is 'Enabled'.
Freeze Frame
If you need to maintain a static image when calling automatic functions, such as presets or patterns, use the
Freeze Frame setting. This prevents the camera movement and lens adjustments being displayed on-screen
while the preset or pattern is being found.
When the Freeze Frame setting is enabled, the scene currently displayed on the video pane will be preserved
(frozen) on-screen until the preset is ready for display. The image then switches smoothly to the new scene. This
may help reduce bandwidth utilization when presets or patterns are used often
Procedure 4-2 Enable/Disable Freeze Frame
Step Action
1 Select Setup on the GUI banner to display the setup menus.
2 Select PTZ Parameters from the PTZ Settings menu.
Select the PTZ Parameters tab.
3 Select the Freeze Frame check box to enable the freeze frame function.
OR
Deselect the Freeze Frame check box to disable the freeze frame function.
The default setting is 'Disabled'.
40
- End -
- End -