Table of Contents
Advertisement
Picture Additional
1
Select Setup on the GUI banner to display the setup menus.
2
Select Picture Settings from the Video menu.
3
Select the Picture Additional tab.
4
Select
The video pane will display the current camera view.
5
Select the required White Balance Mode from the drop-down menu:
• Auto: Suitable for a normal range of lighting conditions
• Manual: Adjustable red and blue balance (The Red and Blue slider bars will be displayed).
• Sodium: (Illustra Pro only)
• Mercury: (Illustra Pro only)
The default setting is 'Auto'.
Procedure 3-12 Manually Select White Balance
Step Action
1
Select Setup on the GUI banner to display the setup menus.
2
Select Picture Settings from the Video menu.
3
Select the Picture Additional tab.
4
Select
The video pane will display the current camera view.
5
Select Manual from the White Balance Mode drop-down menu.
The Red and Blue slider bars will be displayed.
6
Use the slider bars to adjust the Red and Blue balance.
The live video pane will update to display the new settings.
The red and blue values range from 1% to 100%.
Note:
When Automatic White Balance is first switched from enabled to disabled, the red and blue values
displayed are based on the current feedback values from the camera.
Electronic Image Stabilization (EIS)
Electronic Image Stabilization (EIS)on Illustra Pro models can reduce the effect of image shake caused by strong
winds or vehicle vibrations. This ensures a stable picture even at high levels of zoom.
Procedure 3-13 Enable/Disable Electronic Image Stabilization (EIS)
Illustra Pro PTZ Configuration & User Guide
to start the video stream if it is not already active.
to start the video stream if it is not already active.
- End -
- End -
33
Hide quick links:
Advertisement
Table of Contents
