Example Of Changing A Parameter; Changing A Parameter In The Programming Menu - YASKAWA P7 User Manual

Example of Changing a Parameter

Table 3.14 provides an example of how to change parameter "C1-02" (Deceleration Time 1) from 30 seconds to 40 seconds.
Step
Digital Operator Display
Number
-DRIVE-
1
U1-01=
- - - - - - - - - - - - - - - - - - - -
-DRIVE-
2
- - - - - - - - - - - - - -
3
4
5
6
7
Table 3.14 Changing a Parameter in the Programming Menu
Rdy
Frequency Ref
The Drive is first powered up.
0.00Hz
U1-02= 0.00Hz
U1-03= 0.00A
** Main Menu **
Press the MENU key to scroll to "Operation" menu.
Operation
-QUICK-
** Main Menu **
Press the MENU key to scroll to "Quick Setting" menu.
- - - - - - - - - - - - - -
Quick Setting
-ADV-
** Main Menu **
Press the MENU key to scroll to "Programming" menu.
- - - - - - - - - - - - - -
Programming
-ADV-
Initialization
- - - - - - - - - - - - - - - - - - - -
Press the DATA/ENTER key to enter "Programming" menu.
A1-01= 0
Select Language
-ADV-
Accel/Decel
- - - - - - - - - - - - - - - - - - - -
Press the INCREASE key until C1-01 (Accel/Decel) is displayed.
C1-01= 1.0sec
Accel Time 1
-ADV-
Accel Time 1
Press the SHIFT/RESET key to move flashing digit to the right.
- - - - - - - - - - - - - - - - - - - -
C1-01= 30.0sec
(0.0~6000.0)
"30.0sec"
Digital Operator 3 - 14
Description