Alarm Cables; Figure 7-37 5-Port Alarm Daisy-Chain Cable - ADC InterReach Fusion Installation, Operation And Reference Manual

Connecting Contact Alarms to a Fusion System
7.7.3
DB-9 female to
Base Station,
FlexWave Focus,
or
the Alarm Sense
Adapter Cable when
connecting Unison
NOTE: Do not daisy-chain Fusion
Main Hubs with FlexWave Focus if
you want both faults and warnings
from Fusion. Only faults are reported if
you combine Fusion with FlexWave in
the same daisy chain.
7-60
CONFIDENTIAL

Alarm Cables

5-port Alarm Daisy-Chain Cable
Figure 7-37 shows the 5-port Alarm Daisy-Chain Cable (PN 4024-3), which supports
fault and warning conditions.
5-port Alarm Daisy-Chain Cable
Figure 7-37
7
9
J1
Female
4
5
InterReach Fusion Installation, Operation, and Reference Manual
1.2 meters (4 feet)
.5 meter
(1.5 feet)
.5 meter
(1.5 feet)
.5 meter
(1.5 feet)
.5 meter
(1.5 feet)
.25 meter
(.75 feet)
DB-9 male to Fusion,
7
Unison, FlexWave
Focus, Alarm Port
Splice
9
J2
Male
4
Splice
Connector
5
Hood
DB-9 male to Fusion,
7
Unison, FlexWave
Focus Alarm Port
Splice
9
J3
Male
4
Splice
5
DB-9 male to Fusion,
7
Unison, FlexWave
Focus Alarm Port
Splice
9
J4
Male
4
Splice
5
DB-9 male to Fusion,
7
Unison, FlexWave
Focus Alarm Port
Splice
9
J5
4 Male
Splice
5
Option 1: DB-9 to Fusion,
7
Unison, FlexWave
Focus
Alarm Port.
9
J7 not used
J6
Male
4
Option 2: Use J2-J5
for alarm ports. J6 is used
5 to connect to an additional
Alarm Daisy-Chain Cable.
J7 is not used.
7
Option 3: Connect
fewer than 5 ports and
terminate the daisy chain
J7
by connecting J7 to the
4 Female
lowest unused port.
Terminator
D-620610-0-20 Rev D