Figure 7-21 Internet Protocol (Tcp/Ip) Properties Window; Programming The Fusion Main Hub Using Adminbrowser - ADC InterReach Fusion Installation, Operation And Reference Manual

Fusion Installation Procedures
7-38
CONFIDENTIAL

Programming the Fusion Main Hub Using AdminBrowser

• Connect the provided TCP/IP crossover cable to the laptop and then to the
Admin/LAN
RJ-45
• Turn on the laptop and start the Fusion Main Hub.
Windows 2000
Right-click
My Network Places
1.
Highlight
Internet Protocol (TCP/IP)
2.
the Figure 7-21 appears.
Internet Protocol (TCP/IP) Properties Window
Figure 7-21
Make note of the current IP address, Subnet mask, and Default gateway, if they
3.
are configured. You will need to re-enter them after you have configured the
Fusion Main Hub.
Select
Use the following IP address
4.
Change the IP address
5.
Change the
Subnet mask
6.
Change the
Default gateway
7.
Click twice. You may be asked if you want to reboot your computer. If so,
OK
8.
click .
Yes
InterReach Fusion Installation, Operation, and Reference Manual
port on the Fusion Main Hub's front panel.
and select
and click
.
to 192.168.0.101
to 255.255.255.0
to 192.168.0.1
.
Properties
. A screen similar to
Properties
D-620610-0-20 Rev D