Clearing The History, Alarm, And Event Log Screens; Configuration Menu - Master Clear - ADC HIGAIN HDSL2 Manual

152-231-116-01, Revision 01

Clearing the History, Alarm, and Event Log Screens

Select Master Clear to clear the History, Alarm, and Event Log screens after the system has been installed and is
functioning properly. This removes miscellaneous data acquired during the startup session and ensures collection
of accurate and meaningful data thereafter.
Monitor Performance
Clear ALL performance, alarm and event log entries. Are you sure (Y/N)?
ID: xxxx--xxxx--xxxx--xxxx
To clear the Event Log, press
To clear an individual history or alarm screen, do the following:
1 Press P to select the Performance screen.
2 Press the SPACEBAR
H2TU-R HDSL2), then press
3 Press the SPACEBAR
48 Hour History, or 31 Day History) and press
–
Selecting 31 Day History allows you to clear the Current, 25-hour, 48-hour, and 31-day
performance history screens for the selected interface.
–
Selecting Alarm History allows you to clear the alarm history screen for the selected interface. For
information about the DS1 and HDSL2 Alarm screens, see
page 40, respectively.
4 Press L to clear the screen.
To clear ALL history, alarm, and event log screens by this method:
1 Press C to select the Config screen.
2 Use the ↑ and
3 Press Y to clear all screens.
H2TU-C-231 List 1F
Event Log Config
+----------------------+
| Standard Options ->
| ADC Options
| Date and Time
| Master Clear
| Set Factory Defaults |
+----------------------+
09/20/2000 01:35:13
Figure 10. Configuration Menu - Master Clear
E to select the Event Log screen, then press
to select either interface (H2TU-C DS1, H2TU-R DS1, H2TU-C HDSL2, or
ENTER .
to select the type of statistics (Current, Alarm History, 25 Hour History,
↓ arrow keys to select Master Clear.
October 2, 2000
Inventory Rlogon Help
|
-> |
-> |
|
H2TU-C System:
L to clear the screen.
ENTER
after your selection.
Table 14 on page 39
Provisioning
OK_
and Table 15 on
25