Figure 7-34 Using A Bts And Adminbrowser To Monitor Fusion - ADC InterReach Fusion Installation, Operation And Reference Manual

Connecting Contact Alarms to a Fusion System
Band 1
UL1
Modem
Alarms
Alarm
Source
Band 1
UL1
Modem
Alarms
Alarm
Source
Straight-through modem cable connected
to Fusion Main Hub's front panel serial port
Line Switch
7-58
CONFIDENTIAL
Using a Base Station and AdminBrowser to Monitor Fusion
NOTE: The BTS must be configured, by the carrier, for contact closure monitoring
prior to connecting a Fusion Main Hub to it.
In order to take full advantage of Fusion's OA&M capabilities you can use ADC
AdminBrowser software in addition to a BTS to monitor the system, as shown in
Figure 7-34. Refer to Section 7.8.7 for SNMP optional feature capabilities.
Using a BTS and AdminBrowser to Monitor Fusion
Figure 7-34
Fusion Main Hub
Band 3
Band 2
UL3
UL2
DL2 DL3
DL1
Band 2 Band 3
UL2 UL3
DL2 DL3
DL1
PSTN
InterReach Fusion Installation, Operation, and Reference Manual
AC Power
5-port Alarm Daisy-Chain Cable
AC Power
Modem
Alarm
Sense
Interface
Cable
PC running
Standard Browser
Software
D-620610-0-20 Rev D
BTS