Figure 7-18 Installing Directly To The Wall; Installing An Optional Cable Manager In The Rack; Powering On The Expansion Hub - ADC InterReach Fusion Installation, Operation And Reference Manual

Fusion Installation Procedures
7-28
CONFIDENTIAL
Installing Directly to the Wall
Figure 7-18
NOTE: Leave the dust caps on the fiber ports until you are ready to connect the fiber
optic cables.

Installing an Optional Cable Manager in the Rack

• Using the screws provided, fasten the cable manager to the rack, immediately
above or below the Expansion Hub.

Powering On the Expansion Hub

Connect the AC or DC power as explained in "Making Power Connections" on
1.
page 7-18.
InterReach Fusion Installation, Operation, and Reference Manual
D-620610-0-20 Rev D