Main Hub Specifications; Section 3.4 Main Hub Specifications - ADC InterReach Fusion Installation, Operation And Reference Manual

Main Hub Specifications

3.4
Specification
Enclosure Dimensions (H
Weight
Operating Temperature
Non-operating Temperature
Operating Humidity, non-condensing
External Alarm Connector
(contact closure)
ADMIN/LAN Interface Connector
Fiber Connectors
RF Connectors
LED Fault and Status Indicators
AC Power
Power Consumption (W)
MTBF
a. Excluding angle brackets for the 19" rack mounting of the Hub.
b. It is critical to system performance that only SC/APC fiber connectors are used throughout the fiber network, including
fiber distribution panels.
3-10
CONFIDENTIAL
Main Hub Specifications
Main Hub Specifications
Table 3-4
u u
W D) a :
NOTE: The Fusion One Port Main Hub (PN:
FSN-1-MH-1P) configuration is a cost reduced version of the
Fusion Main Hub and supports only one Expansion Hub (up
to 8 RAUs).
InterReach Fusion Installation, Operation, and Reference Manual
Description
89 mm x 438 mm x 381 mm (3.5 in. x 17.25 in. x 15 in.) 2U
<5.5 kg (<12 lb)
0° to +45°C (+32° to +113°F)
–20° to +85°C (–4° to +185°F)
5% to 95%
1 9-pin D-sub, female
Maximum: 40 mA @ 40V DC
Typical: 4 mA @ 12V DC
1 RJ-45, female
1 9-pin D-sub, male for optional modem
b
4 Pair, SC/APC
6 N, female (50 Ohm), 1 Downlink/Uplink pair per band
Unit Status (1 pair):
• Power
• Main Hub Status
Downstream Unit/Link Status (1 per fiber port):
• Link/E-Hub/RAU
Rating 100/240V AC, 1A, 50-60 Hz
Operating Range: 90-132V AC/170-250V AC auto-ranging
30
117,972 hours
D-620610-0-20 Rev D