Messages For System Cpus; Table C-6 Warning/Status Messages For System Cpus; Section C.6 Messages For System Cpus - ADC InterReach Fusion Installation, Operation And Reference Manual

C.6
D-620610-0-20 Rev D

Messages for System CPUs

In Table C-6, the message number is in the following form:
[Snn]/X where nn equals the message number, and X equals the default of either Sta-
tus (S) or Warning (W).
Warning/Status Messages for System CPUs
Table C-6
Message
Number/
Default Description
[S01]/W Alarm Input 1.
[S02]/W Alarm Input 2.
[S03]/W Alarm Input 3.
[S04]/S Performed System Test
[S05]/S Problem detected in the System CPU.
[S06]/S Loaded default etb file.
[S07]/S Loaded default SBC status file.
[S08]/S Problem detected in the System CPU.
[S09]/S TTL is full.
[S10]/S Problem detected in the System CPU.
[S11]/S Problem detected in the System CPU.
[S12]/S Loaded default Password file.
[S13]/S Loaded default sys config file.
[S14]/S Communication retries exceeded.
[S15]/S Problem detected in the System CPU.
[S16]/S Problem detected in the System CPU.
Help Hot Line (U.S. only): 1-800-530-9960
Reason/Action
Check equipment connected to alarm input 1.
Check equipment connected to alarm input 2.
Check equipment connected to alarm input 3.
System has just performed system test.
Contact ADC Support for more information.
Contact ADC Support for more information.
Contact ADC Support for more information.
Contact ADC Support for more information.
Retrieve the TTL and erase.
Contact ADC Support for more information.
Contact ADC Support for more information.
Contact ADC Support for more information.
Contact ADC Support for more information.
Attempted command three times without response.
Contact ADC Support for more information.
Contact ADC Support for more information.
CONFIDENTIAL
C-15