Icd Files - GE B30 Communications Manual

CHAPTER 3: IEC 61850 COMMUNICATION

3.11.3 ICD files

Compared to the G2 model, E3-2.0 adds data objects to the LGOS logical nodes as specified in the following table. E3-2.0
configurations do not use the ExtRef elements used by the G2 model. Conversely, the G2 model does not use the LGOS
data objects added by E3-2.0. Nevertheless, both the G2 model ExtRef elements and E3-2.0 LGOS data objects are included
in ICD files.
Table 3-239: LGOS class for E3-2.0
LGOS class for E3-2.0
Data object Common data
name class
LNName
Data objects
Descriptions
NamPlt LPL
Status information
Beh ENS
St SPS
Alm SPS
SimSt SPS
LastStNum INS
LastSqNum INS
ConfRevNum INS
Settings
GoCBRef ORG
MAC VSG
APPID ING
GoDatSetRef ORG
UR FAMILY – COMMUNICATIONS GUIDE
E3-2.0 IMPLEMENTATION MODEL FOR GOOSE CONFIGURATION VIA SCL
Figure 3-20: SCL file flow using IED setup tool
Explanation
The name shall be composed of the class name, the LN-Prefix and LN-Instance-ID according to
IEC 61850-7-2, Clause 22
Name plate of the logical node, with d data attribute
This logical node's behavior
Status of the subscription (True = active, False = not active)
Complement of St (True = not active, False = active)
Status showing that really Sim messages are received and accepted
Last state number received
Last sequence number received
Last configuration revision number received
Reference to the subscribed GOOSE control block
Publisher IED MAC address
GOOSE message application identifier
Reference to the subscribed GOOSE DataSet
3
T
3-255