GE B30 Communications Manual page 404

MODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS)
LNName: DiscΘXSWI#
data obj. data attribute
ctlModel
BlkOpn
stVal
ctlModel
BlkCls
stVal
ctlModel
InRef1
3
setSrcRef
setSrcCB
cdcNs
cdcName
InRef2
setSrcRef
setSrcCB
cdcNs
cdcName
3.5.4.8 Field contact inputs (FCIn)
This element is instantiated in all UR products (B30, B90, C30, C60, C70, D30, D60, F35, F60, G30, G60, L30, L60, L90, M60,
N60, T35, T60).
Table 3-181: Field contact input data objects
LNName: FCInGGIO1
data obj. data attribute
IndΘ
stVal
3-166
LDevice inst: System UR element: Disconnect Control element #
Type FC UR Name
CtlModels CF
SPC
BOOLEAN ST Disc0XSWI#.BlkOpn.stVal
CtlModels CF
SPC
BOOLEAN ST Disc0XSWI#.BlkCls.stVal
CtlModels CF
ORG
GEORG
ObjectReference SP SWITCH # φA/3P CLSD if Θ="1",
SWITCH # φB CLSD if Θ="2", or
SWITCH # φC CLSD if Θ="3"
VISIBLE SP
STRING255
ObjectReference SP
VISIBLE SP If reference is external to this
STRING255 IED, mapped to the source's
GOOSE control block, else empty
string
VISIBLE EX Name of the GE Multilin
STRING255 namespace at the time of this
firmware release
VISIBLE EX GEORG
STRING255
ORG
GEORG
ObjectReference SP SWITCH # φA/3P OPND if Θ="1",
SWITCH # φB OPND if Θ="2", or
SWITCH # φC OPND if Θ="3"
VISIBLE SP
STRING255
ObjectReference SP
VISIBLE SP If reference is external to this
STRING255 IED, mapped to the source's
GOOSE control block, else empty
string
VISIBLE EX Name of the GE Multilin
STRING255 namespace at the time of this
firmware release
VISIBLE EX GEORG
STRING255
LDevice inst: System UR element: Field Contact Inputs
Type FC UR Name
SPS
BOOLEAN ST FCI Θ On
CHAPTER 3: IEC 61850 COMMUNICATION
Description
0
Disconnect switch open commands
blocked from all sources including
protection
0
Disconnect switch close commands
blocked from all sources
0
SWITCH # φA/3P CLSD setting" if Θ="1",
"SWITCH # φB CLSD setting" if Θ="2", or
"SWITCH # φC CLSD setting" if Θ="3
reference to the data attribute to input
source GoCB of input if via GOOSE
SWITCH # φA/3P OPND setting" if Θ="1",
"SWITCH # φB OPND setting" if Θ="2", or
"SWITCH # φC OPND setting" if Θ="3
reference to the data attribute to input
source GoCB of input if via GOOSE
Description
FCI Θ On operand value
UR FAMILY – COMMUNICATIONS GUIDE
R/W/C
R
R
R
R
R
R
R
R
R
R/C
R/C
R/C
R/C
R
R
R
R
R/C
R/C
R/C
R/C
R
R
R/W/C
R
R