GE B30 Communications Manual page 464

SCL IMPLEMENTATION CONFORMANCE STATEMENT (SICS)
Table 3-225: SCL conformance statement
ICD Export
I11 Fix ICD file (no adaptable export needed)
I12 Export of ICD file or IID file according to IED
preconfiguration performed by tool
I13 State the data model name space (61850-7-3
subclause 7.2) within ICD file (LLN0.NamPlt.ldNs value)
I14 State the data model version (61850-7-3 subclause
7.8.3) and any predefined / fixed configuration values
within ICD file (9.5.4.4)
I15 Version 2003 export
3
I16 Version 2007 export
I17 Predefined data sets
I18 Predefined control blocks
I19 Substation bay template with IED part
I110 Communication section with default address
I111 Export correct valKind value (Table 46)
I112 Exports internal addresses as InRef or Input section
(subclause 9.3.13)
I113 Exports internal addresses in Input section with
expected serviceType (subclause 9.3.13)
I114 Exports in UTF-8 coding
SCD import
I21 Identify IED to be configured in SCD file by IED name
I22 Configure LD name (at least via ldInst, dependent on
the IED capabilities) and IED addresses from SCD
I23 Determine communication side addresses of IED inputs
from SCD
I24 Determine and use clock communication addresses
from SCD
I25 Configure values of (existing) control block from SCD
(9.3)
I26 Prepare (new) control block instances according to SCD
file
I26 Prepare / configure data sets according to SCD file
I28 Modify predefined data sets according to SCD
I29 Interpret client references in the control blocks of other
IEDs to find the control block instances allocated to this
IED, and data sent to this IED.
I210 Set IED configuration values and parameter values as
defined in SCD file
I211 Support changed (reduced capability) valKind (e.g. from
Set to RO or to Conf) (able 46)
I212 Support ldName on other IEDs (9.3.4)
I213 Interpret input signal references to source control
blocks (9.3.13)
I214 Imports UTF-8 coding of XML
IID export after IED engineering
3-226
CHAPTER 3: IEC 61850 COMMUNICATION
UR UR Setup Value/comments
firmware software
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
If renamed Yes
CID
Yes Yes
IP address
is used to
locate the
IED name
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes Where configurable
Yes Yes
Yes Yes
Yes Yes
Yes Yes
UR FAMILY – COMMUNICATIONS GUIDE