Appendix; New And Extended Functions; Firmware Version 4.7 Sp10; A.1 New And Extended Functions - Siemens Sinamics CU240D-2 DP Operating Instructions Manual

Appendix

A.1

New and extended functions

A.1.1

Firmware version 4.7 SP10

Table A- 1 New functions and function changes in firmware 4.7 SP10
Function
1 New parameter r7844 [1] for displaying the firmware version in plain text.
"04070901" is equivalent to firmware version V4.7 SP9 HF1, for example
2 Modbus RTU
The factory setting of parameter p2040 was increased to provide more
•
robust inverter operation. Monitoring time for data failure at the Mod-
bus interface: p2040 = 10 s
r2057 indicates how the address switch on the inverter is set
•
3 BACnet MS/TP:
New factory setting for more robust inverter operation:
•
– Baud rate p2020 = 38.4 kBd
– Monitoring time for data failure at the BACnet interface was in-
creased: p2040 = 10 s
– Factory setting for the maximum number of info frames p2025
[1] = 5
– Factory setting for the maximum number of master addresses
p2025 [3] = 32
r2057 indicates how the address switch on the inverter is set
•
4 Further technological unit kg/cm² for unit switchover
5 Further technological unit kg/cm² for additional technology controllers
Converter with the control units CU240D-2
Operating Instructions, 04/2018, FW V4.9 SP10, A5E34262100B AF
SINAMICS
G120
✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ ✓ ✓
- - ✓ - - -
✓ ✓ ✓ ✓ ✓ ✓
- - ✓ - - -
A
G120D
✓ ✓ ✓
- - -
- - -
✓ ✓ ✓
- - -
321