Remote Programming - Rate And Bandwidth - Keithley 2750 User Manual

Model 2750 Multimeter/Switch System User's Manual
Remote programming — rate and bandwidth
Rate and bandwidth commands
The commands to set the integration rate and bandwidth are listed in
information on these commands follows the table.
NOTE
Table 4-5
Rate and bandwidth commands
Commands
Integration rate commands
[SENSe[1]]
:VOLTage[:DC]:NPLCycles <n> [, <clist>]
:VOLTage[:DC]:APERture <NRf>
[, <clist>]
:VOLTage:AC:NPLCycles <n> [, <clist>]
:VOLTage:AC:APERture <NRf> [, <clist>]
:CURRent[:DC]:NPLCycles <n> [, <clist>]
:CURRent[:DC]:APERture <NRf>
[, <clist>]
:CURRent:AC:NPLCycles <n> [, <clist>]
:CURRent:AC:APERture <NRf> [, <clist>]
:RESistance:NPLCycles <n> [, <clist>]
:RESistance:APERture <NRf> [, <clist>]
:FRESistance:NPLCycles <n> [, <clist>]
:FRESistance:APERture <NRf> [, <clist>]
:TEMPerature:NPLCycles <n> [, <clist>]
:TEMPerature:APERture <NRf> [, <clist>]
Query commands are not included in
subsystem are provided in
1, 7
Optional root command.
Range, Digits, Rate, Bandwidth, and Filter
Table 4-5. All commands for the SENSe
Table 15-5.
Description
Set rate for DCV in PLCs; <n> = 0.01 to x.
Set rate for DCV in secs; <NRf> = x to 1.
Set rate for ACV in PLCs; <n> = 0.01 to xx.
Set rate for ACV in secs; <NRf> = x to1.
Set rate for DCI in PLCs; <n> = 0.01 to x.
Set rate for DCI in secs; <NRf> = x to 1.
Set rate for ACI in PLCs; <n> = 0.01 to x.
Set rate for ACI in secs; <NRf> = x to 1.
Set rate for Ω2 in PLCs; <n> = 0.01 to x.
Set rate for Ω2 in secs; <NRf> = x to 1.
Set rate for Ω4 in PLCs; <n> = 0.01 to x.
Set rate for Ω4 in secs; <NRf> = x to 1.
Set rate for TEMP in PLCs; <n> = 0.01 to x.
Set rate for TEMP in secs; <NRf> = x to 1.
4-11
Table 4-5. Additional
Default
2
5.0
3
(Note 4)
2,5
5.0
3,5
(Note 4)
2
5.0
3
(Note 4)
2,5
5.0
3,5
(Note 4)
2
5.0
3
(Note 4)
2
5.0
3
(Note 4)
2
5.0
3
(Note 4)