Keithley 2750 User Manual page 372

Model 2750 Multimeter/Switch System User's Manual
Table 15-9
Trigger command summary
Command
INITiate
[:IMMediate]
:CONTinuous <b>
:CONTinuous?
ABORt
TRIGger[:SEQuence[1]] Path to program Trigger Layer:
:COUNt <n>
:COUNt?
:DELay <n>
:AUTO <b>
:AUTO?
:DELay?
:SOURce <name>
:SOURce?
:TIMer <n>
:TIMer?
:SIGNal
SAMPle
:COUNt <NRf>
:COUNt?
Notes:
1. Defaults for continuous initiation:
SYSTem:PRESet enables continuous initiation.
*RST disables continuous initiation.
2. Defaults for count:
SYSTem:PRESet sets the count to INF (infinity).
*RST sets the count to 1.
Description
Subsystem command path:
Initiate one trigger cycle.
Enable or disable continuous initiation.
Query continuous initiation.
Reset trigger system.
Set measure count (1 to 110000, or INFinity).
Query measure count.
Set delay (0 to 999999.999 sec).
Enable or disable auto delay.
Query state of delay.
Query delay.
Select control source (IMMediate, TIMer,
MANual, BUS, or EXTernal).
Query control source.
Set timer interval (0.001 to 999999.999 sec).
Request the programmed timer interval.
Loop around control source.
Specify sample count (1 to 110000).
Query sample count.
SCPI Reference Tables
Default
parameter Ref
Sec 8
(Note 1)
(Note 2)
0
OFF
IMM
0.1
1
15-25
SCPI