Basic DMM Operation
•
DMM measurement capabilities — Summarizes the measurement capabilities of
the Model 2750 and covers maximum signal levels for switching modules.
•
High energy circuit safety precautions — Provides safety information when per-
forming measurements in high energy circuits.
•
Performance considerations — Covers some considerations that affect overall
performance including warm-up, autozero, and line synchronization.
•
Channel list parameter (<clist>) — Summarizes the use of the <clist> parameter
which is used throughout this manual to configure scan channels.
•
Voltage measurements (DCV and ACV) — Provides detailed information for
making basic DC and AC voltage measurements.
•
Current measurements (DCI and ACI) — Provides detailed information for
making basic DC and AC current measurements.
•
Resistance measurements — Provides detailed information for making resistance
measurements. Also covered are offset compensated ohms (OCOMP) and dry cir-
cuit ohms (DRYCKT).
•
Temperature measurements — Provides detailed information for making thermo-
couple, thermistor, and 4-wire RTD temperature measurements.
•
Frequency and period measurements — Provides detailed information for mak-
ing frequency and period measurements.
•
Continuity testing — Explains how to use the CONT feature to test continuity.
•
Remote programming for basic measurements — Covers the commands used to
perform basic measurements. Includes some simple programming examples.
•
Measurement queries — Summarizes commands typically used to trigger and/or
return measured readings.
3