Keithley 2750 User Manual page 353

15-6 SCPI Reference Tables
Table 15-2
DISPlay command summary
Command
DISPlay
[:WINDow[1]]
:TEXT
:DATA <a>
:DATA?
:STATe <b>
:STATe?
:ENABle <b>
:ENABle?
Note: *RST and SYSTem:PRESet have no effect on commands in this subsystem. The listed defaults are power-on defaults.
Table 15-3
FORMat command summary
Command
FORMat
[:DATA] <type>
[,<length>]
[:DATA]?
:ELEMents <item list>
:ELEMents?
:BORDer <name>
:BORDer?
Note: The SYSTem:PRESet and *RST default is READ, UNIT, RNUM, and TST.
Description
Path to control user text messages.
Define ASCII message "a"
(up to 12 characters).
Query text message.
Enable or disable message mode.
Query text message state.
Enable or disable the front panel display.
Query state of the display.
Description
Select data format (ASCii, SREal, or DREal).
Query data format.
Specify data elements (READing, CHANnel,
UNITs, RNUMber, TSTamp, and LIMits).
Query data elements.
Select binary byte order (NORMal or
SWAPped).
Query byte order.
Model 2750 Multimeter/Switch System User's Manual
Default
parameter Ref SCPI
(see Note) Sec 1
(none)
OFF
OFF
Default
parameter Ref SCPI
Sec 14
ASCii
(see Note)
SWAPped