Keithley 2750 User Manual page 363

15-16 SCPI Reference Tables
Table 15-5 (continued)
SENSe command summary
Command
[SENSe[1]]
:TEMPerature
:TCouple
:TYPE <type> [, <clist>]
:TYPE? [<clist>]
:ODETect <b>
:ODETect?
:RJUNction
:RSELect <name>
[, <clist>]
:RSELect? [<clist>]
:SIMulated <n>
[, <clist>]
:SIMulated? [<clist>]
:THERmistor
[:TYPE] <NRf>
[, <clist>]
[:TYPE]? [<clist>]
:FRTD
:TYPE <name>
[, <clist>]
:TYPE? [<clist>]
:RZERo <NRf>
[, <clist>]
:RZERo? [<clist>]
:ALPHa <NRf>
[, <clist>]
:ALPHa? [<clist>]
:BETA <NRf> [, <clist>]
:BETA? [<clist>]
:DELTa <NRf>
[, <clist>]
:DELTa? [<clist>]
Model 2750 Multimeter/Switch System User's Manual
Description
Path to configure thermocouple:
Select T/C type (J, K, T, E, R, S, B, N).
Query T/C type.
Enable or disable T/C open detector.
Query state of T/C open detector.
Path to configure reference junction:
Select reference junction (SIMulated,
INTernal, or EXTernal).
Query reference junction.
Set simulated reference temperature;
0 to 65 (°C), 32 to 149 (°F), or 273
to 338 (K).
Query simulated reference
temperature.
Path to configure thermistor:
Set thermistor type in ohms (1950 to
10050).
Query thermistor type.
Path to configure 4-wire RTD;
Select FRTD type (PT100, D100, F100,
PT3916, PT385, or USER.
Query FRTD type.
Specify constant for USER type (0 to
10000).
Query rzero.
Specify constant for USER type (0 to
0.01).
Query alpha.
Specify constant for USER type (0 to
1.00).
Query beta.
Specify constant for USER type (0 to
5.00).
Query delta.
Default
parameter
5
K
OFF
5, 6
(Note 7)
23
5000
PT100
100
0.00385
0.111
1.507
Ref SCPI
Sec 3
Sec 3
Sec 3