Keithley 2750 User Manual page 172

Model 2750 Multimeter/Switch System User's Manual
Table 5-1 (continued)
Rel commands
Commands
Rel commands for ACI
[SENSe[1]]
:CURRent:AC:REFerence <n> [, <clist>]
:CURRent:AC:REFerence:STATe <b>
[, <clist>]
:CURRent:AC:REFerence:ACQuire [, <clist>]
Rel commands for Ω2
[SENSe[1]]
:RESistance:REFerence <n> [, <clist>]
:RESistance:REFerence:STATe <b> [, <clist>]
:RESistance:REFerence:ACQuire [, <clist>]
Rel commands for Ω4
[SENSe[1]]
:FRESistance:REFerence <n> [, <clist>]
:FRESistance:REFerence:STATe <b> [, <clist>]
:FRESistance:REFerence:ACQuire [, <clist>]
Rel commands for TEMP
[SENSe[1]]
:TEMPerature:REFerence <n> [, <clist>]
:TEMPerature:REFerence:STATe <b> [, <clist>]
:TEMPerature:REFerence:ACQuire [, <clist>]
Rel commands for FREQ
[SENSe[1]]
:FREQuency:REFerence <n> [, <clist>]
:FREQuency:REFerence:STATe <b> [, <clist>]
:FREQuency:REFerence:ACQuire [, <clist>]
1
Optional root command.
Optional root command.
Optional root command.
2
Optional root command.
Optional root command.
Rel, Math, Ratio, Channel Average, dB
Description
Specify rel value; <n> = -3.1 to 3.1 (A).
Enable/disable rel; <b> = ON or OFF.
Use input signal as rel value.
Specify rel value; <n> = 0 to 120e6 (Ω).
Enable/disable rel; <b> = ON or OFF.
Use input signal as rel value.
Specify rel value; <n> = 0 to 120e6 (Ω).
Enable/disable rel; <b> = ON or OFF.
Use input signal as rel value.
Specify rel value; <n> = -200 to 1820 (°C). 0
Enable/disable rel; <b> = ON or OFF.
Use input signal as rel value.
Specify rel value; <n> = 0 to 1.5e7 (Hz).
Enable/disable rel; <b> = ON or OFF.
Use input signal as rel value.
5-5
Default
0
OFF
0
OFF
0
OFF
OFF
0
OFF