Keithley 2750 User Manual page 354

Model 2750 Multimeter/Switch System User's Manual
Table 15-4
ROUTe command summary
Command
ROUTe
:MONitor <clist>
:STATe <b>
:STATe?
:DATA?
:POINts <NRf>
:POINts?
:MONitor?
:CLOSe <clist>
:STATe? <clist>
:ACONfigure <b>
:ACONfigure?
:COUNt? <clist>
:INTerval
<NRf>
:INTerval?
:CLOSe?
:OPEN:ALL
:MULTiple
:OPEN <clist>
:CLOSe <clist>
:STATe? <clist>
:CLOSe?
Description
Specify one channel to be monitored.
Enable or disable channel monitoring.
Query state of channel monitoring.
Returns the most recent monitor reading.
For a monitor scan, specify number of chan-
nels
to scan (2 to 110000).
For a monitor scan, query number of channels
to
scan.
Query the channel to be monitored.
Close the one specified channel (all others will
open).
Query closed channels in specified list;
1 = closed.
Enable or disable auto-configure.
Query state of auto-configure.
Query closure count for specified channels.
Set count update interval in minutes (10 to
1440).
Query relay count update interval.
Returns a <clist> of closed channels.
Open all channels.
Path to control multiple channels:
Open channel(s) specified in list. Unlisted
channels not affected.
Close channel(s) specified in list
channels not affected.
Query closed channels in specified list;
1 = closed.
Return list of all closed channels.
SCPI Reference Tables
Default
parameter
OFF
(Note 1)
(Note 2)
(Note 3)
4
. Unlisted
15-7
Ref SCPI
Sec 7
Sec 2
Sec 2
Sec 2
Sec 2