Ieee Command Groups - Keithley 2750 User Manual

Model 2750 Multimeter/Switch System User's Manual

IEEE command groups

Command groups supported by the Model 2750 are listed in
mands and SCPI commands are not included in this list.
Table G-5
IEEE command groups
HANDSHAKE COMMAND GROUP
UNIVERSAL COMMAND GROUP
ADDRESS COMMAND GROUP
LISTEN
TALK
ADDRESSED COMMAND GROUP
STATUS COMMAND GROUP
NDAC = NOT DATA ACCEPTED
NRFD = NOT READY FOR DATA
DAV = DATA VALID
ATN = ATTENTION
DCL = DEVICE CLEAR
IFC = INTERFACE CLEAR
REN = REMOTE ENABLE
SPD = SERIAL POLL DISABLE
SPE = SERIAL POLL ENABLE
LAG = LISTEN ADDRESS GROUP
MLA = MY LISTEN ADDRESS
UNL = UNLISTEN
TAG = TALK ADDRESS GROUP
MTA = MY TALK ADDRESS
UNT = UNTALK
OTA = OTHER TALK ADDRESS
ACG = ADDRESSED COMMAND GROUP
GTL = GO TO LOCAL
SDC = SELECTIVE DEVICE CLEAR
RQS = REQUEST SERVICE
SRQ = SERIAL POLL REQUEST
STB = STATUS BYTE
EOI = END
IEEE-488 Bus Overview
Table G-5. Common com-
G-13