Keithley 2750 User Manual page 233

7-28 Scanning
Table 7-1
Scanning commands
Commands
Scan commands
ROUTe:SCAN <clist>
ROUTe:SCAN?
ROUTe:SCAN:TSOurce <list>
ROUTe:SCAN:NVOLatile <b>
ROUTe:SCAN:LSELect <name> Enable/disable scan; <name> = INTernal (on) or
ROUTe:MONitor <clist>
ROUTe:MONitor:POINts <NRf> Specify number of channels to scan; <NRf> = 2 to
ROUTe:MONitor:STATe <b>
ROUTe:MONitor:DATA?
ROUTe:CLOSe:ACONfigure <b> Enable or disable auto channel configuration.
Limits commands
CALCulate3:LIMit1:UPPer <n> Set high limit 1 for monitor; <n> = -4294967295 to
CALCulate3:LIMit1:LOWer <n> Set low limit 1 for monitor; <n> = -4294967295 to
CALCulate3:LIMit2:UPPer <n> Set high limit 2 for monitor; <n> = -4294967295 to
CALCulate3:LIMit2:LOWer <n> Set low limit 2 for monitor; <n> = -4294967295 to
CALCulate3:LIMit1:STATe <b> Enable/disable limit 1 test; <b> = ON or OFF.
CALCulate3:LIMit2:STATe <b> Enable/disable limit 2 test; <b> = ON or OFF.
Model 2750 Multimeter/Switch System User's Manual
Description
Specify list of channels to be scanned.
Returns list of channels to be scanned.
Select trigger(s) to start scan; <list> = IMMediate, or
HLIMit1, LLIMit1, HLIMit2, LLIMit2.
Enable or disable auto scan; <b> = ON or OFF.
NONE (off).
Specify one channel to be monitored.
110000.
Enable/disable monitor; <b> = ON or OFF.
Returns the most recent monitor reading.
+4294967295.
+4294967295.
+4294967295.
+4294967295.
Default Ref
a
IMM b
(Note 1)
OFF
c
(Note 3) d
OFF
1.0
-1.0
2.0
-2.0
OFF
OFF