Table of Contents
Advertisement
Chapter 12 Configuration/General/Update
On this page the device can be configured to poll an update server (a normal web server).
A file pointed to by an URL is read from the update server and executed. This is an
efficient mechanism to keep a large number of devices up to date. See chapter 13
"Configuration of the Update Server" for a detailed description of the available
commands.
URL
An URL, for example http://192.168.0.1/update/script-ip800.txt, pointing to a file
whose commands are executed.
If the URL ends with a slash '/', for example http://192.168.0.1/update/, the device is
adding the file name update-ipxxx.htm automatically, deduced from the device short
name (for example update-ip800.htm). Furthermore some placeholders may be used in
the URL-String as described in the update servers scfg command description.
These placeholders may be used e.g. to address a device-specific directory (http://
192.168.1.2/update/#h/script.txt) or to generate HTTP-GET parameters (http://
192.168.0.1/update/script.php?mac=#m).
Some standard parameters are always appended to the query part of the URL:
Name
ver
BOOT
PROT
CHECK
BMC
CFG
CFG-BACKUP-NUM
If access to the command file requires authentication it must be configured within the
HTTP-Client of the device.
Value
human readable version
information (as shown in the
Version' line of the general page
(display, for programmatic use
rather apply #F etc.)
last serial for boot command
last serial for prot command
last serial for check command
last serial for bmc command
last serial for cfg command
last backup number for scfg
command
KIRK Wireless Server 600v3 Installation and Configuration Guide
Example
6.00 dvl-sr1
IP6000[07-60600.03],
Bootcode[145], HW[104]
16384/131072
336
07-6060003
20070511-01
189
Advertisement
Table of Contents
