7.6.7.1 Setting LDAP Mode
Under the Configuration menu, click LDAP, and then click Server.
1
Figure 63 Adm. Page: Configuration/LDAP/Server page
In the User fields, type the user names.
2
In the Password fields, type the passwords.
3
Select the Write Access check box.
4
Click OK.
5
Click Reset (under Administration menu) to save your configuration.
6
7.6.7.2 Setting LDAP Replicator
In a KWS600v3 Multi-cell solution the alternative LDAP Server needs access to the
information (such as system ARI code and user data) that are stored on the Master
KWS600v3/LDAP Server. Therefore, it is necessary to activate the LDAP replicator
services for the alternative LDAP Server.
Configuring KIRK Wireless Server 600v3
(Alt. LDAP Server)
(Alt. LDAP Server)
KIRK Wireless Server 600v3 Installation and Configuration Guide
121