Configuring KIRK Wireless Server 600v3
114
7.6.4.5 Configuring DECT Master
On the Master page you need to define the KWS600v3 as a Secondary KWS600v3.
Under the Configuration menu, click DECT, and then click Master.
1
Figure 55 Adm. Page: Configuration/DECT/Master page
From the Mode list, select Off. Selecting Off defines the KWS600v3 as a Secondary.
2
Check that the protocol H323 is selected from the Protocol list.
3
Note: The H.323 Protocol is always used for internal communication between
KWS600v3 secondaries, regardless of the protocol used in the Master KWS600v3.
Click OK.
4
Click Reset (under Administration menu) to save your configuration.
5
14117800, Ed.2.6
(Secondary)