Table of Contents
Advertisement
Configuring KIRK Wireless Server 600v3
116
7.6.4.7 Configuring DECT Radio
On the Radio page you define which radio ID the Master KWS600v3 and Sync Master has
to synchronize with.
Under the Configuration menu, click DECT, and then click Radio.
1
Figure 57 Adm. Page: Configuration/DECT/Radio page
In the Master field, type the IP address of the Master KWS600v3.
2
In the Radio-Id field, type the radio ID number of the KWS600v3. The radio ID can be
3
a number between 1 and 255. See your site planner.
Note: It is advisable to make the IP address numbering of a Secondary KWS600v3
identical with the radio ID number of the unit in question, eg.:
• IP address 192.168.1.3/Radio ID 3
• IP address 192.168.1.4/Radio ID 4
• IP address 192.168.1.5/Radio ID 5
In the Sync-Source field, type the radio ID of the KWS600v3, you want to
4
synchronize on. See your site planner.
In the Alt-Sync-Source field, type the radio ID of the KWS600v3, you want to
5
synchronize on. See your site planner.
Click OK.
6
Click Reset (under Administration menu) to save your configuration.
7
The Secondary KWS600v3 is now configured.
Note: When configuring more KWS600v3 secondaries, it is possible to make a backup of
the configuration file of the first configured Secondary KWS600v3. This configuration file
can be used as input to configure the rest of the KWS600v3 secondaries. For more
information about making a backup of a configuration file, refer to
Configuration File" on page
secondaries using a backup configuration file of another Secondary KWS600v3 as input,
refer to
"" on page
14117800, Ed.2.6
(Secondary)
178. For more information about configuring KWS600v3
117.
"Updating
Advertisement
Table of Contents
