Configuring KIRK Wireless Server 600v3
126
This section describes how to configure a KWS600v3 Multi-cell solution.
Figure 67 Wireless Server 600v3 Multi-cell installation
This section contains information about:
•
"Configuring the IP Master (Primary) KIRK Wireless Server 600v3" on page 91
•
"The Sync Master is now configured." on page 104
•
"" on page 132
•
"" on page 133
•
"" on page 136
•
"" on page 108
•
"Saving Configurations" on page 141
•
"" on page 141
•
"Opening Configuration Files" on page 144
7.8.1 Configuring the Master (Primary) KIRK Wireless Server 600v3
Note: To configure a KWS600v3 Multi-cell solution it is necessary to obtain a multi-cell
license. (E-mail the MAC address to the emeadkordermanagement@polycom.com, and
you will receive an e-mail containing a text file with the multi-cell license. This file must
be saved in order to be uploaded to the system).
In the Master tab you configure the Master (Primary) KWS600v3.
14117800, Ed.2.6