Table of Contents
Advertisement
Figure 5-2
Connect Power to the Bottom of the Repeater and External Antenna Cable to the Rear of the Repeater
Connect the power supply cable into the RJ11 connector in the bottom of the repeater. For repeaters
1
with external antenna, connect the external antenna cable to the antenna connector in the rear of the
repeater as well.
Mount the repeater onto the wall using the screws accompanying the repeater.
2
Figure 5-3
Repeater and External Antenna Installed on the Wall
External Antenna
(Only for repeaters
supplied with external
antenna connection)
KIRK Wireless Server 600v3 Installation and Configuration Guide
Installing the KIRK Repeater
Holes for wall mounted
screws
External antenna cable (only
for repeaters supplied with
external antenna connection
Power supply cable
Repeater
53
Advertisement
Table of Contents
