Table of Contents
Advertisement
Click Reset (under Administration menu) to save your configuration.
9
7.6.3.3 Configuring Ethernet Link
Under the Configuration menu, click ETH0, and then click Link.
1
Figure 46 Adm. Page: Configuration/ETH0/Link page
From the Link list, select auto, and then click OK.
2
When selecting auto, the link speed will be determined by the network switch.
Click Reset (under Administration menu) to save your configuration.
3
7.6.3.4 Configuring DECT Master
On the Master page you need to define the KWS600v3 as an alternative (Standby) Master
KWS600v3.
Under the Configuration menu, click DECT, and then click Master.
1
Figure 47 Adm. Page: Configuration/DECT/Master page
Configuring KIRK Wireless Server 600v3
(Standby)
(Standby)
KIRK Wireless Server 600v3 Installation and Configuration Guide
107
Advertisement
Table of Contents
