Table of Contents
Advertisement
7.6.4.6 Configuring DECT System
Under the Configuration menu, click DECT, and then click System.
1
Figure 56 Adm. Page: Configuration/DECT/System page
In the Name field, the name MUST ALWAYS be DECT.
2
If changing the name, the system cannot operate.
In the PWD (password) field, type the password, and then type it again in the field
3
below.
Note: If you have changed the password when configuring the Master (Primary)
KWS600v3, you must use this when configuring the alternative Master (Standby)
KWS600v3 and KWS600v3 secondaries.
Click OK.
4
Click Reset (under Administration menu) to save your configuration.
5
Configuring KIRK Wireless Server 600v3
(Secondary)
KIRK Wireless Server 600v3 Installation and Configuration Guide
115
Advertisement
Table of Contents
