7.6.2.3 Configuring DECT Master
Under the Configuration menu, click DECT, and then click Master.
1
Figure 40 Adm. Page: Configuration/DECT/Master page
From the Mode list, select Off. Selecting Off defines the KWS600v3 as not being the
2
Master.
From the Prot (Protocol) list, select H323.
3
Click OK.
4
Click Reset (under Administration menu) to save your configuration.
5
7.6.2.4 Configuring DECT Radio
Under the Configuration menu, click DECT, and then click Radio.
1
Figure 41 Adm. Page: Configuration/DECT/Radio page
In the Master field, type the IP address of the Master (Primary) KWS600v3.
2
In the Radio-id field, type the radio ID of the Sync Master.
3
Click OK.
4
Configuring KIRK Wireless Server 600v3
(Sync Master)
(Sync Master)
KIRK Wireless Server 600v3 Installation and Configuration Guide
103