Retrieving Serial Number On Kirk 3040 Handsets; Retrieving Serial Number On Kirk 4020/Kirk 4040/Kirk 4080 Handsets; Figure 9 Remove Back Cover From Handset - Polycom KIRK 14117800 Installation And Configuration Manual

Preparing KIRK Handset for Use
74

6.6.1 Retrieving Serial Number on KIRK 3040 Handsets

Press down the back cover and push it 5 mm towards the headset plug.
1

Figure 9 Remove Back Cover from Handset

Lift off back cover.
2
Lift the battery and read the serial number.
3
Replace battery and back cover.
4
Note: To show the serial number on the handset display, press *99984*, and then press
; the serial number appears on the handset display. Press < for 5 seconds to exit the
menu.

6.6.2 Retrieving Serial Number on KIRK 4020/KIRK 4040/KIRK 4080 Handsets

Use a screwdriver to unscrew the plate on the rear of the handset to access the battery
1
compartment.
Warning: The plate on the rear of the 4080 Handset must not be removed in a potentially
explosive atmosphere.
Insert the screwdriver into the small crack behind the blind cover and press to open
2
the handset.
14117800, Ed.2.6